One of our great customers named Francis made a great suggestion. We listened. "I found this little ratchet at Harbor Freight. You should tell your customers about it." We looked into it.
It was not a $50 Snap-On that will last a lifetime but it really gets the job done well, and will never break working on a Nissan Rogue heater box. The best part is it fits into the tight spaces almost perfectly.
Then we had another thought. What if we added a pick, plastic prybar, 10mm socket and phillips bits to make it complete? After weeks of sourcing we found it all. By ordering all the tools in large quantities we made it work!
The only other thing that would need to be added to the kit is a cleaning fluid. So naturally we added that in also. The kits also now come with 4 large alcohol wipes. That ought to be more than enough to clean up any Nissan Rogue blend door.
Now when you purchase a Nissan Rogue Heater & AC Fix kit you get everything you need to make the upgrade-start to finish! Of course if you have a power tool, or a premium micro ratchet that will be faster. But if you are a regular vehicle owner you are set with this kit. The plastic prybar allows you to remove the side panel with no damage. The 10mm socket fits the two bolts at the hood release handle. The micro ratchet and allows a little easier removal of the vent and motor screws. An included short phillips bit fits the vent, and the longer 50mm bit fits the motor. The pick tool makes the vent a little easier to work with.
We are so excited to be able to offer this now. It has never been easier to repair and upgrade your Nissan Rogue Heater / AC box!
If you have any suggestions we are always eager to hear them. Thank you and have a great day!